Eicon Networks S93 Installationsanleitung PDF herunterladen (Seite 59)

Installing Additional Components 59

CHAPTER 4

Installing Additional Components

Installing virtual modems

If you want to use Diva Server for Windows NT to send faxes, access ISDN mailboxes or

communicate with analog modems, you first have to install and configure the Eicon Port

driver (which you might have done during the installation process, see Eicon Port driver

on page 41). When the Eicon Port driver is installed, you have to install the virtual modems

which are to use the Port driver.

Note: You have to restart your computer after the installation process of Diva Server for

Windows NT is complete before you can install virtual modems.

Install the virtual modems as follows:

1. Click ‘Start > Settings > Control Panel’.

2. Double-click ‘Modems’.

If a modem has already been installed before, the ‘Modem Properties’ dialog box

appears. Click ‘Add’.

3. In the ‘Install New Modem’ dialog box, check the option ‘Don’t detect my modem; I

will select it from a list’. Click ‘Next’.

4. In the displayed dialog box, click ‘Have Disk’.

5. Type the path to the installation files:

• Insert your Diva Server CD-ROM into the CD-ROM drive and type:

D:\DRIVER\WINNT\ENGLISH\SERVICE

(where D: is your CD-ROM drive letter).

• Or enter the path to the files on your hard disk, e.g.:

C:\ISDN\SERVICE

(where C: is your hard disk letter)

Click ‘OK’.

6. Select the modem you want to install. The following modems are available:

• Eicon Diva Analog Modem: Install this modem for analog data communications to

analog modems over ISDN or channelized T1.

• Eicon Diva PPP-Modem (56K): Install this modem for digital ISDN connections with

a transfer rate of 56 kbps.

• Eicon Diva PPP-Modem (64K): Install this modem for digital ISDN connections with

a transfer rate of 64 kbps.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 129 130

Keine Kommentare

Eicon Networks S93 Installationsanleitung Seite 59