Eicon Networks S93 Installationsanleitung PDF herunterladen (Seite 44)

Eicon Port driver 44

5. Click ‘OK’. The configured port is displayed in the ‘Eicon Port Driver Setup’.

Note: If new ports are added or deleted, the changes will become effective only when

the system is restarted.

6. If you do not plan to use the Eicon virtual COM Port driver with advanced configuration,

click ‘OK’ to terminate the Port driver configuration.

Advanced parameters of the Eicon Port driver

The ‘Advanced Parameters’ are only required in the following circumstances:

• To configure MSN/EAZs

• To configure the Generic Server Modem

• If there are problems with the driver

Select the option ‘Advanced Parameters’ in the ‘Eicon Port Driver Setup’ dialog box. You

may now configure MSNs/EAZs in the ‘Add Port’ or ‘Change Port’ dialog boxes (see Phone

numbers/extensions below).

The following ‘Generic Server Modem’ option appears under ‘Page’ in addition to the ‘Port

List’. To configure the Generic Server Modem (see Generic Server Modem

on page 46)

Phone numbers/extensions

Since all three networking applications, WAN-Miniport, CAPI, and Port driver can be

installed in parallel, you should configure phone numbers (MSNs/EAZs) or extensions to

ensure that the Port driver accepts only calls that are intended for it.

Phone numbers or extensions are also required, for example, if a PC is set up as an

extension of the PBX and can be reached only by a specific extension number.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 129 130

Keine Kommentare

Eicon Networks S93 Installationsanleitung Seite 44