Eicon Networks S93 Installationsanleitung PDF herunterladen (Seite 54)

AT-command set of the Eicon ISDN Port 54

AT +iS <x>/<y> Service Indicator/Additional Service Indicator

It tells the remote site which kind of connection you want to establish.

Command affects the Low-Layer Capabilities (LLC) element on the SETUP

message.

x: Service Indicator

y: Additional Service Indicator

x/y = 1/1 ISDN Voice call 3,1 kHz

x/y = 1/2 Analog Voice call

x/y = 1/3 ISDN Voice call 7 kHz

x/y = 2/1 Fax Group 2

x/y = 2/2 Fax Group 3

x/y = 2/3 Data over modem connection

x/y = 2/4 BTX over modem connection

x/y = 7/0 64 kbps Data

x/y = 7/170 56 kbps Data

x/y = 7/197 V.110 Rate Adaptation

AT +iN <x>/<y> Numbering Plane Identifier

x: Identification for the local phone number

y: Identification for the remote phone number

Note: The modem driver applies default numbering plane identifiers that

need not be changed.

AT +iO <Number> Origination Address - The modem driver places this number as the

origination address. (For subaddresses see Subaddress

on page 55.)

AT +iA <Number> Accepted Address - The modem driver only accepts incoming calls if the

called party number equals the phone number configured here. (For

subaddresses see Subaddress

on page 55.)

Command Description

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 129 130

Keine Kommentare

Eicon Networks S93 Installationsanleitung Seite 54