Eicon Networks S93 Installationsanleitung PDF herunterladen (Seite 104)

Installation in Unattended Mode 104

Example of the WAN-Miniport section

[WAN]

IgnoreCallbackNumber=0

NoAnswerTimeout=14

Logging=1

Protocol=0

ShortholdMode=1

ShortholdTime=100

CallbackPrefix=0

AuthProtocol=0

SecurityLevel=2

UserNameDelimiter=;

AuthTimeout=10

NumberChecking=0

NumberCheckingFile=

IgnoreCallbackNumber=0

ForceAnalogBcOnCallback=0

Port driver section

The Port driver can be installed with default parameters which means that no parameters

are defined in the ‘MODEMS’ section. However, if you need to change the default settings,

you can modify the following parameters:

Logging

Logging specifies which protocol and status messages are logged. Possibled settings are:

• 0: for error traces only

• 1: for standard tracing

• 2: for tracing of error messages, incoming and outgoing connection plus tracing of data

traffic of the B-channels or channelized T1 channels (size of data blocks, type of data

packets of the PPP connection, etc.)

• 3: for a full trace

The default is 1.

FirstPort

FirstPort (Assigning the first port) specifies to which serial ports the ISDN or channelized

T1 ports are assigned. During installation of Diva Server for Windows NT the ISDN or

channelized T1 ports are automatically assigned to the installed serial ports starting from

the first installed serial port counting consecutively upwards. If you want to assign other

serial ports to the Port driver, select a new port, e.g. COM 9, as first port. Allowed values

are 5 to 100.

The default is ‘5’.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 129 130

Keine Kommentare

Eicon Networks S93 Installationsanleitung Seite 104