Eicon Networks S93 Installationsanleitung PDF herunterladen (Seite 100)

Installation in Unattended Mode 100

TerminalCount

This parameter specifies the number of logical terminals that are assigned to your ISDN

line.

The default value is ‘2’.

If your telephone company assigned one phone number for your ISDN line, select ‘1’. This

is the typical case for National ISDN 1 and AT&T switches. If your telephone company

assigned two different phone numbers for the ISDN line, select ‘2’ logical terminals. This

usually applies for Nortel Networks (formerly known as Northern Telecom) switches and

for National ISDN 1 switches in some regions. For the proper setting refer to the

documentation provided when you ordered the ISDN line, or contact your telco company.

OAD1 / OAD2, SPID1 / SPID2

These parameters define the SPIDs (Service Profile Identifiers) and the corresponding

subscriber numbers (MSNs) specified by your ISDN service provider. The default setting

is an empty string for all values. See below for an example of a SPID and subscriber

number configuration:

OAD1=608124323

OAD2=608124324

SPID1=6081243230000

SPID2=6081243240000

UsEktsNumCallAppearances

Set a value for UsEktsNumCallAppearances to activate the CACH (Call Appearance Call

Handling) feature that allows you to handle more than one call on an individual device.

The value corresponds to the number of indicator lamps that signal incoming calls.

Possible values are 0 to 20.

UsEktsFeatAddConf:

The ‘Add to conference’ feature allows you to start a conference or to add a new participant

to a conference. Set the command code value that activates this feature for your switch

type. Your ISDN service provider can supply the required information.

Possible values are 0x00 to 0xff.

UsEktsFeatRemoveconf

The ‘Remove from Conference’ feature allows you to disconnect the last participant who

joined a conference. Set the command code value that activates this feature for your switch

type. Your ISDN service provider can supply the required information.

Possible values are 0x00 to 0xff.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 129 130

Keine Kommentare

Eicon Networks S93 Installationsanleitung Seite 100