Eicon Networks CX1 Spezifikationen Seite 86

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 232
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 85
Across the Boards
Communications Device Drivers
Section 6 - MAINCON Driver Configuration
Page 236
cfSOFTWARE Confidential,
2000
6.11 MAINCON Panel C2
cfDFT Coax
Configuration filename: MAINCFG.DFT
Used by cf Device Drivers:
#
Name Description
23 CFXDFTX, CFXDFTN, CFXDFTS cfDFT
28 CFXDFTX, CFXDFTN, CFXDFTS cfDFT without SF Support
__________________
ACROSS-THE-BOARDS(r) Config
__________________
------- cfDFT via IBM Coax Card --------
First coax card port address (in hex)... 2D0
Coax card RAM address (in hex).......... CE00
Number of host sessions (1 to 5)........ 1
Coax-card Interrupt Enabled (Y/N)....... Y
Power-On-Reset wait time seconds........ 30
Trace size in K bytes................... 0
The CFXDFT interrupt number (in hex).... 60
3270 Controller type (Non-SNA or SNA)... N
Session 1 model and EAB support......... 2
If card I/O addresses were changed from hex 2D0, enter new I/O address here.
F10: write config to disk Esc: Exit
1. I/O Port Origin
If the I/O port base address on the IBM 3279/79, IBM 3270 Connection Card, or compatible coax card has
been changed from the normal 2D0h, this field must be configured.
2. RAM Address
If the shared RAM address on the IBM 3279/79, IBM 3270 Connection Card, or compatible coax card has
been changed from the normal 2D0h, this field must be configured.
3. Number of Host Sessions
The number of host sessions (1 to 5) to be configured.
4. Adapter Interrupt Available
Most IBM 3278/79 cards, IBM 3270 Connection cards and compatibles support IRQ2. If the card does not
support interrupts, or IRQ2 conflicts with other system usage, specifing N will avoid the use of interrupts.
The default of Y will cause cfDFT to use interrupts.
5. P-O-R Wait Time
The amount of time cfDFT will wait for the controller to respond to a Power-On-Reset of the 3278/79 card.
The default (and minimum) value is 10 seconds.
Seitenansicht 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 231 232

Kommentare zu diesen Handbüchern

Keine Kommentare