
Across the Boards
Communications Device Drivers
Section 6 - MAINCON Driver Configuration
Page 338
cfSOFTWARE Confidential,
2000
6.32 MAINCON Panel G1
Dynacomm Elite LU6.2
Configuration filename: MAINCFG.DE6
Used by cf Device Driver:
#
Name Description
56 CFX62DE Dynacomm Elite
__________________
ACROSS-THE-BOARDS(r) Config
__________________
--------- Dynacomm Elite LU6.2 ---------
Trace size in K bytes......... 0000
Connect timeout (seconds)..... 0000
Default configuration key..... CONFIG #1
Configuration Records:
Key Description
--- ----------------------------------------
CONFIG #1 Sample Configuration #1
ALT 2 Alternate Configuration
Enter a non-zero value (4-1000) to enable a diagnostic trace of
the LU6.2 session.
PgDn: Next Page PgUp: Prior Page F10: Write config to disk Esc: Exit
1. Trace Size in K bytes
Defines the size of the allocated trace buffer in KB. If zero, the trace is disabled. Otherwise, the trace size
can be specified up 63K bytes.
2. Connect Timeout
Defines the time that the driver will wait for the host application to respond to the connect request.
The Dynacomm Elite LU6.2 configuration panels allow for the definition of up to eight configurations for
connecting to the host. Each configuration has a “Key” which is used by the application to select which
configuration record to use. Also, one of the configurations is marked as the “default”, which is used in case the
application does not explicitly specify a key.
At least one configuration record must be added, and one of the configuration records must be marked as a
default.
To add a new configuration record, tab to the configuration record list and press F2 -- the configuration panel
will be displayed. Enter a key and any other required data, then press F10.
To delete a configuration record, tab to that configuration record and press F3.
Kommentare zu diesen Handbüchern