Eicon Networks CX1 Spezifikationen PDF herunterladen (Seite 39)

Across the Boards



Communications Device Drivers

Section 5 - General Configuration and Usage Information

Page 189

cfSOFTWARE Confidential,



2000

5.7 Windows NT CFXNTDD.SYS Installation

CFXIRMA3.DLL (device number 1), CFXIBMX3.DLL (#7) and CFXFORT3.DLL (#4) require that

CFXNTDD.SYS be installed.

NOTE

: Drivers 81, 82, 83 are synonyms for 1, 4, and 7.

Run the INSTNTDD.EXE installation program or use the following manual procedure:

5.7.1 Copy CFXNTDD.SYS to \WINNT\SYSTEM32\DRIVERS

5.7.2 Use REGINI to add the items in CFXNTDD.INI to the registry (“REGINI CFXNTDD.INI”)

NOTE

: REGINI is available in either the SDK or the NT Resource Kit. It is assumed that the

application’s installation program will install the driver for the end-user.

5.7.3 Use the “Drivers” tool on the control panel to start “CfxNTdd”

5.7.4 You may wish to set “CfxNTdd” to manual startup

5.7.5 When using an Irma 2, Irma 3, Irma 3t

If you are using an Irma 2, Irma 3, Irma 3t or one of the coax cards that requires a microcode load, and

the vendor does not have an NT compatible microcode load program (DCA does not), you will need to

load the microcode outside of NT, probably from a DOS boot diskette.

5.7.6 For

pcMAINFRAME

installations, program INSTNTGT.EXE must be run (once) to install

CFXNTDD.SYS

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 231 232

Keine Kommentare

Eicon Networks CX1 Spezifikationen Seite 39