Eicon Networks CX1 Spezifikationen PDF herunterladen (Seite 100)

Across the Boards



Communications Device Drivers

Section 6 - MAINCON Driver Configuration

Page 250

cfSOFTWARE Confidential,



2000

6.16 MAINCON Panel D3, DEC VT100 (continued)

5. HW Flow - Hardware Flow Control Option

‘0’/‘1’/‘2’ - none/CTS-RTS/DSR-DTR. Selects type of hardware flow control, usually used with error

correcting modems. Setting CTS/RTS will prevent the driver from sending data unless the modem raises

CTS, setting DSR/DTS prevents the driver from sending unless the modem raises DSR. CTS/RTS is most

commonly used with error correcting modems.

6. Flicker

Controls how much extra time (in 100ths of a second) will be spent waiting to insure that the protocol

converter has stopped sending data.

7. Keydelay

The number of milliseconds delay between sending characters to the protocol converter. This can be used

to prevent overruns at the protocol converter.

8. Comm

‘1’ through ‘9’ and ‘:’, ‘;’, ‘<’, ‘=’, ‘>’ and ‘?’ (ASCII values 031h through 03Fh) representing COMM

ports 1 through 15. For DOS, COM1 and COM2 are predefined, and any other values require a

MAINCFG.POR. For Windows and OS/2, COM1 through COM9 may be specified.

9. Baud

The required baud rate. 300=300bps, 1200=1200bps, 2400=2400bps, 4800=4800bps, 9600=9600bps,

144=14400bps, 192=19.2kbps, 18=19.2kbps (synonym), 288=28800bps, 38=38400bps, 56=56kbps,

115=115kbps.

NOTE

: Not all drivers and environments support all baud rates.

10. Parity

‘E’ = Even, ‘O’ = Odd, ‘S’ = Space, ‘M’ = Mark, and ‘N’ = None.

11. Data Bits

‘7’ or ‘8’ data bits.

12. Stop Bits

‘1’ or ‘2’ stop bits.

13. Attributes

Setting this field to ‘1’ will cause VT100 attributes to be honored, and an attribute shadow buffer to be

maintained. ‘2’ is obsolete and will produce the same result as ‘1’.

14. Half-Duplex

Setting this field to ‘1’ will cause the VT100 emulator to operate in half-duplex mode. Half-duplex mode is

significantly inferior to full-duplex mode for terminal emulation and data transfer. Full-duplex mode should

be used where ever possible.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 231 232

Kommentare zu diesen Handbüchern

Keine Kommentare

Eicon Networks CX1 Spezifikationen Seite 100

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Eicon Networks CX1