Eicon Networks CX1 Spezifikationen PDF herunterladen (Seite 76)

Across the Boards



Communications Device Drivers

Section 6 - MAINCON Driver Configuration

Page 226

cfSOFTWARE Confidential,



2000

6.3 MAINCON Panel B1

CUT Mode/Single Session 3270

IBM 3270 Connection

Configuration filename: MAINCFG.IBM

Used by cf Device Drivers:

Name Description

7 CFXIBMX IBM 3278/9 CUT Mode

83 CFXIBMX3 WOW IBM 3278/9 CUT Mode

__________________

ACROSS-THE-BOARDS(r) Config

__________________

---- IBM 3270 Connection (CUT mode) ----

First IBM port address (in hex)......... 2D0

IBM RAM address (in hex)................ CE00

CUT mode model.......................... 2

Dead Controller Check................... 0

If IBM I/O addresses were changed from hex 2D0, enter new I/O address here.

F10: write config to disk Esc: Exit

1. I/O Port Origin

If the I/O port base address on the IBM 3279/79, IBM 3270 Connection Card, or compatible coax card has

been changed from the normal 2D0h, this field must be configured.

2. RAM Address

If the shared RAM address on the IBM 3279/79, IBM 3270 Connection Card, or compatible coax card has

been changed from the normal CE00h, this field must be configured.

3. CUT Model/EAB

The 3270 model to use. ‘2’ = 24x80, ‘3’ = 32x80, ‘4’ = 43x80, ‘5’ = 27x132. EABs are not supported by

the CFXIBMX driver and the second character of this field must always be blank.

4. Dead Controller Check

When set to ‘1’, will attempt to detect if a 3174 controller stops responding.

NOTE

: This requires a feature that is not implemented on all IBM compatible coax cards. This should not

normally be enabled.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 231 232

Eicon Networks CX1 Spezifikationen Seite 76