Eicon Networks CX1 Installationshandbuch PDF herunterladen (Seite 14)

G&R

The G&R/Ggate product off-loads the DSA session protocol into gateways.

By running Ggate on the system(s) with the mainframe connections the

emulator platforms need only the very small and efficient Ggate protocol layer

to connect over TCP/IP to a Ggate gateway with full native Bull network

functionality. Ggate can make the mainframe connection using OSI-transport or

RFC1006. If you must use OSI-transport for the mainframe connection, using

Ggate will limit the need for OSI-stacks to the Ggate platforms.

The Host Links Installation and Configuration manuals cover the OSI stack

installation and setup for the supported UNIX and Windows server systems.

Bull systems can also be accessed using Telnet VIP (TNVIP). The TNVIP

servers in the MainWay, the Bull DPX/20, GCOS8 GNSP, the Open Systems

personalities of GCOS7 Diane systems and G&R/Ggate are all qualified.

However, RFC1006 will increase throughput as compared to using TNVIP. It

will also give a real, fully functional DSA or DIWS session over the TCP/IP

network, as compared to the limited terminal session offered by TNVIP.

IBM systems can be accessed using DSA into the Bull front-end and the

OSF/SNA gateway (supported in the Datanet and MainWay). IBM systems can

also be accessed using Telnet 3270 (TN3270 or TN3270E) to connect to any

TN3270ÙSNA gateway or front-end. The MainWay gateway, the TN3270

server on the Bull DPX/20 UNIX systems, the IBM TN3270 front-end and the

TN3270 server for Windows are all qualified. Additionally, IBM AS400

systems, or other host systems that supports the 5250 family of terminals, can

be accessed using Telnet 5250 (TN5250) connecting through a Telnet 5250

server.

Gline Line Handlers and Configuration

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 132 133

Keine Kommentare

Eicon Networks CX1 Installationshandbuch Seite 14