Eicon Networks P92 Installationsanleitung PDF herunterladen (Seite 6)

6 EiconCard P92 Installation Guide

Installing the EiconCard P92

The steps below describe how to install the EiconCard P92.

1 Prepare the PC

Turn off the PC and disconnect its power cable. Remove the cover of

the PC according to the instructions that came with it.

2 Install the EiconCard P92

Insert the EiconCard P92 in any available PCI port. Secure the

adapter to the chassis of the PC using the bracket-retaining screw.

Reinstall the cover of the PC and reconnect the power cable.

3 Test the EiconCard P92

The application software that you purchased with the EiconCard P92

contains a test program to verify the card’s integrity. Consult the

documentation supplied with this software for details.

4 Configure the EiconCard P92

Before you can use the EiconCard P92, you must configure it to work

with your communications software. The documentation which came

with this software contains complete instructions

on how to configure the card. During

configuration, note the following:

• The ports are numbered Port 1 and Port 2 as

indicated in Figure 1.

• The LEDs indicate connection and

configuration status. For a description of

connection status indications, see page 8.

For a description of how the LEDs are used

during configuration, consult the

documentation which came with your

networking software.

Figure 1. End Bracket

Port 1

LED 1

Port 2

LED 2

203086-1.FM5 Page 6 Friday, February 28, 1997 10:35 AM

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Keine Kommentare

Eicon Networks P92 Installationsanleitung Seite 6