Eicon Networks C20 Bedienerhandbuch PDF herunterladen (Seite 250)

100

101

INTUITY Messaging Solutions Release 4

MAP/5P Maintenance

585-310-186

Issue 3

October 1997

Replacing Other Components

Page 7-20Memory Replacement

4. Replace the circuit cards in the bottom three slots. See

“Installing a Circuit Card

” in Chapter 5, ‘‘Replacing or

Installing Circuit Cards’’.”

5. Replace the dress cover. See “Replacing the Dress Cover

”

in Chapter 4, ‘‘Getting Inside the Computer’’

,” for this

procedure.

6. Restore the incoming power. See “Restoring Power to the

MAP/5P” in Chapter 4, ‘‘Getting Inside the Computer’’,” for

this procedure.

7. Reboot the system. See “Rebooting the System

” in Chapter

3, ‘‘Common System Procedures’’,” for the procedure.

If the system shows an amount of memory less than that installed

on the card, both of the SIMMs should be replaced, continue with

the next procedure, “Extracting the SIMMs

.”

Extracting the SIMMs

To extract the SIMMs, do the following:

1. Release the metal snap locks at the edge of the SIMM2 socket by gently

pushing them to the outside (Figure 7-7

Figure 7-7. SIMM Socket

2. Rotate the SIMM downward to approximately a 45-degree angle.

3. Remove the SIMM.

1. SIMM in socket - top view 2. SIMM - side view

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 409 410

Kommentare zu diesen Handbüchern

Keine Kommentare

Eicon Networks C20 Bedienerhandbuch Seite 250

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Eicon Networks C20