Eicon-networks DIVA LAN ISDN Bedienungsanleitung PDF herunterladen (Seite 145)

Chapter Ten: Other Configuration Tools DTMF interface 145

DTMF interface

The DIVA LAN ISDN Modem enables you to set certain parameters using a standard touch-tone telephone.

Prerequisites

• touch-tone analog phone

Local access

• Phone must be plugged into PHONE port 2.

• ISDN line must not be connected.

Remote access

• Not available.

How it works

Plug an analog phone into PHONE port 2.

• Each command starts and ends with a #.

• A short beep indicates that the command you entered was accepted.

• Continuous beeping indicates that the command you entered was rejected. Enter # to start a new command

and end the beeping.

Commands

The following commands are available.

Set primary ISDN telephone number

#TN1 ISDN number # (#861ISDN number #)

Example: #8614078#

Set second ISDN telephone number

#TN2 ISDN number # (#862 ISDN number #)

Example: #8624079#

Set ISDN switch type

• #STA# (#782#) AT&T 5ESS

• #STP# (#787#) AT&T 5ESS Point-to-Point

• #STN# (#786#) NI-1

• #STD# (#783#) Detect Switch Type Automatically

Save configuration and reset

#SA# (#72#)

Reset to factory defaults

#RF# (#73#)

Set LAN IP address

#IPxxx*xxx*xxx*xxx# (#47xxx*xxx*xxx*xxx#)

Example: #47192*168*4*1#.

Set LAN IP subnet mask

#SMxxx*xxx*xxx*xxx# (#76xxx*xxx*xxx*xxx#)

Example: #76255*255*255*0#.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 212 213

Keine Kommentare

Eicon-networks DIVA LAN ISDN Bedienungsanleitung Seite 145