Eicon-networks Adapters Bedienungsanleitung PDF herunterladen (Seite 14)

Installing Your Server Adapter

ENGLISH

If the ISDN line uses open-ended wire connections:

In some cases, you are required to connect to your network termination using the

open-ended connectors. The transmission (TX) leads and the receiving (RX)

leads are identiﬁed by color; transmission leads are blue and white-blue, receiving

leads are orange and white-orange.

Use the supplied RJ-45 with open ends cable:

Note If your NT or external CSU is turned on while your computer is connected

to the ISDN network and the DIVA Server PRI is not connected or the wiring is

wrong, a layer 1 warning light appears at the switching center of the network

provider. If you are using an external CSU, a warning light appears on the CSU

as well. The network provider will then deactivate the ISDN line. If this occurs,

you must contact your network provider to re-enable your line.

DIVA Server PRI Signals Open Ends Remarks

Pin 1 Receive + (RX +) white-orange twisted w. Receive- (RX -)

Pin 2 Receive - (RX -) orange twisted w. Receive+ (RX +)

Pin 4 Transmit + (TX +) white-blue twisted w. Transmit- (TX -)

Pin 5 Transmit - (TX -) blue twisted w. Transmit+ (TX +)

shielded plug overall shielded shield foil shield

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

Keine Kommentare

Eicon-networks Adapters Bedienungsanleitung Seite 14